This Article is about HSSC Instructor, Welder, Storekeeper & Other Recruitment 2019. Haryana Staff Selection Commission has recently announced Instructor, Welder, Storekeeper & Other Notification to fill 3206 Posts on its Official site hssc.gov.in. HSSC Invites Online Application for Instructor, Welder, Storekeeper & Other Posts. Candidates can apply through HSSC also at our Site schools360.in. Candidates should know the Eligibility details of HSSC Instructor, Welder, Storekeeper & Other Recruitment before Apply. The Application Process is going between 05-08-2019 to 14-09-2019. The Remaining all details are available here Please Check once.
Notification Details
Last Date Extension Notification & New Dates
Download Last Datte Extension Notification: Click Here
| Advertisement No. | Date of Publication/Re- Publication | Opening Date of Submission of Online application | Closing Date of Submission of Online application | Closing Date for Deposit of Fees |
| 12/2019 | 20.07.2019 | 28.08.2019 | 14.09.2019 | 18.09.2019 |
| 13/2019 | 26.08.2019 | 02.09.2019 | 18.09.2019 | 24.09.2019 |
| 14/2019 | 26.08.2019 | 06.09.2019 | 22.09.2019 | 26.09.2019 |
HSSC Recruitment Notification 2019 Details
| Name of The Organization | Haryana Staff Selection Commission (HSSC) |
| No. of Posts | 3206 Vacancies |
| Name of the Posts | Instructor, Welder, Storekeeper & Other |
| Job Category | Haryana Govt Jobs |
| Educational Qualifications | B.Tech, Engg Diploma, Engg Graduate, M.Sc, B.Sc, BCA, MCA, MBA, BBA, BHM, BAMS, BA, B.Lib, 10th, 12th |
| Job Location | Haryana |
| Application Mode | Online Process |
| Last Date | 14-09-2019 |
| Official Website | hssc.gov.in |
Vacancy Details of HSSC Recruitment 2019
A Total of 3206 jobs are Mentioned in this HSSC Recruitment
| Name of the Post | No. of Posts |
|---|---|
| Skill Development & Industrial Training Department, Haryana, Panchkula | |
| Surveyor Instructor (Theory) | 2 |
| Forger & Heat Treater (Black Smith)Instructor (Theory) | 1 |
| Librarian (Re-Advertised) | 45 |
| Turner Instructor, Theory(Re-Advertised) | 93 |
| Welder (Gas & Electric) Instructor, Practical (ReAdvertised). | 38 |
| Fitter Instructor, Theory (Re-Advertised) | 144 |
| Employability Skill Instructor, (Re-Advertised). | 114 |
| Surveyor Instructor, Practical (Re-Advertised). | 1 |
| Computer Instructor (Re-Advertised | 59 |
| Mechanical Refrigerator and Air Condition Instructor, Theory (Re-Advertised) | 68 |
| Workshop Calculation & Science Instructor (ReAdvertised) | 244 |
| Engineering Drawing Instructor (Re-Advertised). | 277 |
| Plumber Instructor, Theory (Re-Advertised). | 58 |
| Foundry Man (Moulder) Instructor (Theory) (Re-Advertised). | 2 |
| Architectural Assistant Instructor, Theory (Re-Advertised) | 3 |
| Carpenter Instructor, Practical (Re-Advertised) | 14 |
| Wireman Instructor, Theory (Re-Advertised) | 47 |
| Storekeeper (Re-Advertised) | 112 |
| Mill wright Mechanic (Electrical/Electronic) Instructor, Theory (Re-Advertised) | 18 |
| Machinist Instructor, Practical (Re-Advertised | 8 |
| Mill wright Mechanic (Mechanical) Instructor, Theory (ReAdvertised). | 43 |
| Group Instructor/ Apprenticeship Supervisor/Senior Technical Assistant/ Junior apprenticeship and Placement Officer (Re-Advertised). | 132 |
| Electrician Instructor Theory(Re-Advertised). | 143 |
| Apprenticeship Instructor Re-Advertised). | 38 |
| Turner Instructor Practical(Re-Advertised) | 51 |
| Welder (Gas & Electric) Instructor Theory (ReAdvertised). | 123 |
| Architectural Assistant Instructor Practical (ReAdvertised) | 6 |
| Mechanic Electronic Instructor Theory(Re-Advertised). | 44 |
| Fitter Instructor Practical(Re-Advertised). | 89 |
| Computer Operator Programming Assistant Instructor (Theory) (Re-Advertised). | 31 |
| Plastic Processing Operator Instructor (Practical) (ReAdvertised). | 2 |
| Mechanic Electronic Instructor (Practical) (ReAdvertised). | 37 |
| Desk Top Publisher Operator Instructor (Practical) (ReAdvertised). | 1 |
| Plastic Processing Operator Instructor Theory) (ReAdvertised) | 6 |
| Electrician Instructor (Practical) (Re-Advertised) | 108 |
| Tractor Mechanic Instructor (Theory) (Re-Advertised) | 42 |
| Craft Instructor (women) Fashion Technology (Theory) (ReAdvertised). | 3 |
| Tractor Mechanic Instructor (Practical) (Re-Advertised) | 5 |
| Wireman Instructor (Practical) (Re-Advertised). | 40 |
| Mechanic Computer Hardware Instructor (Theory) (ReAdvertised). | 7 |
| Mechanic Computer Hardware Instructor (Practical) (ReAdvertised). | 12 |
| Mech. Refrigerator and Air Conditioning Instructor (Practical) (Re-Advertised). | 42 |
| Desktop Publisher Operator (Theory) (Re-Advertised) | 2 |
| Draughtsman Civil Instructor (Practical) (Re-Advertised) | 45 |
| Draughtsman Mechanical Instructor(Theory) (ReAdvertised). | 38 |
| Craft Instructor (women) cutting & Sewing (Theory) (ReAdvertised) | 41 |
| Draughtsman Mechanical Instructor (Practical) (ReAdvertised). | 28 |
| Craft Stenography Hindi Instructor (Theory) (ReAdvertised). | 30 |
| Craft Stenography Hindi Instructor (Practical) (ReAdvertised). | 12 |
| Machinist Instructor (Theory) (Re-Advertised) | 73 |
| Craft Stenography English Instructor (Theory) (ReAdvertised). | 31 |
| Craft Stenography English Instructor (Practical) (ReAdvertised) | 21 |
| Machinist (Grinder) Instructor (Practical) (Re-Advertised) | 2 |
| Craft Instructor Health Sanitary Inspector (Theory) (ReAdvertised). | 6 |
| Craft Instructor Health Sanitary Inspector (Practical) (ReAdvertised) | 6 |
| Machinist Grinder Instructor (Theory) (Re-Advertised). | 7 |
| Litho Offset Machine Minder Instructor (Theory) (ReAdvertised)= | 3 |
| Tool & Die Maker (Dies & Moulds) Instructor (Theory) (Re-Advertised) | 11 |
| Hospitality Course Senior Instructor (Hospitality) (Theory) (Re-Advertised). | 3 |
| Tool & Die Maker (Dies & Moulds) Instructor (Practical) (Re-Advertised) | 5 |
| Food production Instructor (Theory) (Re-Advertised). | 4 |
| Computer Networking and Hardware Technician (ReAdvertised). | 1 |
| Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised). | 63 |
| Computer Operator (Re-Advertised). | 5 |
| Junior Programmer (Re-Advertised). | 2 |
| Craft Instructor (women)Fashion Technology (Practical) (Re-Advertised). | 4 |
| Plumber Instructor (Practical) (Re-Advertised). | 28 |
| Mill Wright Mechanic (Electrical/ Electronics) Instructor (Practical) (Re- Advertised). | 19 |
| Mill Wright Mechanic (Mechanical) Instructor (Practical) (Re- Advertised). | 44 |
| Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Fashion Technology, Cutting and Sewing, Embroidery and Needle Work, Dress making (Re- Advertised) | 10 |
| Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Hair & Skin Care (Re- Advertised). | 3 |
| Lab Attendant (Food Production, Food & Beverage Service) Instructor (Theory) (Re- Advertised). | 4 |
| Painter General Instructor(Theory) (Re- Advertised) | 38 |
| Mechanic Motor Vehicle Instructor(Theory) (ReAdvertised). | 56 |
| Information Technology and Electronics System Maintenance Instructor(Theory) (Re- Advertised). | 1 |
| Mechanic Machine Tool maintenance Instructor(Theory) (Re- Advertised) | 1 |
| Mechanic Motor Vehicle Instructor(Practical) (ReAdvertised). | 25 |
| Information Technology and Electronics System Maintenance Instructor (Practical) (Re- Advertised | 3 |
| Mechanic Machine Tool Maintenance Instructor (Practical) (Re- Advertised). | 2 |
| Sheet Metal Worker Instructor (Theory) (Re- Advertised) | 7 |
| Instrument Mechanic Instructor (Theory) (Re- Advertised). | 8 |
| Craft Instructor (women)(Dress Making (Theory) (ReAdvertised). | 19 |
| Mechanic Diesel Instructor(Theory) (Re- Advertised). | 39 |
| Instrument Mechanic Instructor (Practical) (ReAdvertised). | 4 |
| Craft Instructor (women)(Dress Making) (Practical) (Re- Advertised) | 14 |
| Mechanic Diesel Instructor (Practical) (Re- Advertised) | 19 |
| Mechanic Agriculture Machinery Instructor (Theory) (ReAdvertised). | 5 |
| Mechanic Consumer Electronics Instructor (Practical) (Re- Advertised). | 12 |
| Mechanic Agriculture Machinery Instructor (Practical) (ReAdvertised) | 3 |
| Craft Instructor (women) Hair & Skin Care(Theory) (ReAdvertised) | 30 |
| Interior Decoration and Designing Instructor (Theory) (ReAdvertised). | 2 |
| Interior Decoration and Designing Instructor (Practical) (Re- Advertised) | 1 |
| Craft Instructor (women) Computer Aided Embroidery (Theory) (Re- Advertised) | 6 |
| Craft Instructor (women) Computer Aided Embroidery (Practical) (Re- Advertised) | 6 |
| Draughtsman Civil Instructor (Theory) (Re- Advertised) | 58 |
| Carpenter Instructor (Theory) (Re- Advertised) | 61 |
| Technical Assistant(Re- Advertised). | 2 |
Eligibility Criteria
Educational Qualification
| Name of the Post | Qualification |
| Skill Development & Industrial Training Department, Haryana, Panchkula | |
| Surveyor Instructor (Theory) | i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil/Survey from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/Architectural Assistant/Civil/Syrvey from State Board of Technical Education of any State Government with two years practical/ teaching experience. (ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Forger & Heat Treater (Black Smith)Instructor (Theory) | (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Metallurgical/Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Metallurgical/Mechanical from State Board of Technical Education of any State Government with two years practical/ teaching experience. (ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Librarian (Re-Advertised) | (i) Bachelor degree in Library Science from a recognized university; (ii)Two years experience as a Junior Librarian in any reputed Institute; (iii)Hindi / Sanskrit upto Matric Standard or higher education. |
| Turner Instructor, Theory(Re-Advertised) | (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical / Production/ Industrial Engineering from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Production/Industrial from State Board of Technical Education of any State Government with two years practical/ teaching experience. (ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Welder (Gas & Electric) Instructor, Practical (ReAdvertised). | (i) National Trade Certificate/ National Apprenticeship Certificate in Welding/Fabrication (CoE) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Welding passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. (ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Fitter Instructor, Theory (Re-Advertised) | (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Production/ Industrial/ Fabrication Engineering from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Production/ Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience. (ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Employability Skill Instructor, (Re-Advertised). | i)Full time, regular mode Bachelor degree of Business Administration (BBA) and Master of Business Administration (MBA) from recognized university ii) Hindi / Sanskrit upto Matric standard or higher education; |
| Surveyor Instructor, Practical (Re-Advertised). | (i) National Trade Certificate/ National Apprenticeship Certificate in Surveyor with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Surveyor passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Computer Instructor (Re-Advertised | i) AICTE recognized Bachelor degree in Computer Engineering/ Information Technology or its equivalent from AICTE recognized institute/university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/teaching experience; OR ‘A’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with two years practical/ teaching experience in the related field; OR B’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with one year practical/teaching experience in the related field; OR M.Sc Computer/ M.Sc Computer Application/ M.Sc Information Technology/ M.Sc Software/MCA after passing B.Sc./ BCA from a recognized university; |
| Mechanical Refrigerator and Air Condition Instructor, Theory (Re-Advertised) | (i) AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Electrical/Refrigeration and Air Conditioning from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Electrical/ Refrigeration and Air Conditioning from State Board of Technical Education of any State Government with two years practical/ teaching experience. ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Workshop Calculation & Science Instructor (ReAdvertised) | (i)AICTE recognized Bachelor degree in Engineering/ Technology or its equivalent in Electrical/ Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience; OR Diploma in Engineering or its equivalent in Electrical /Mechanical from State Board of Technical Education of any State Government with two years practical/teaching experience. (ii) Knowledge of Hindi / Sanskrit upto Matric standard or higher education. |
| Engineering Drawing Instructor (Re-Advertised). | AICTE recognized Bachelor degree in Engineering/ Technology or its equivalent in Electrical/ Mechanical trade, from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience; OR Diploma in Engineering or its equivalent in Electrical /Mechanical trade, from State Board of Technical Education of any State Government with two years practical/teaching experience. |
| Plumber Instructor, Theory (Re-Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/ Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/ Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Foundry Man (Moulder) Instructor (Theory) (Re-Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Metallurgical/Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Metallurgical/Mechanical from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Architectural Assistant Instructor, Theory (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Carpenter Instructor, Practical (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Wireman Instructor, Theory (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electrical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electrical from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Storekeeper (Re-Advertised) | (i) Full time, regular mode bachelor degree in Business Administration or Commerce or bachelor degree in Arts with Math/ Economics subject, passed with minimum 55% marks from any recognized University; (ii) One years experience in handling Engineering Store, Posting of Stock Books and Ledgers or in accounts work in Govt. or Private reputed Engineering Institute or any Firm/company registered under Apprenticeship Act; iii) Hindi / Sanskrit upto Matric standard or Higher Education |
| Mill wright Mechanic (Electrical/Electronic) Instructor, Theory (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electrical/ Mechatronics/ Electronics from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electrical/ Mechatronics / Electronics from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Machinist Instructor, Practical (Re-Advertised | (i) National Trade Certificate/ National Apprenticeship Certificate in Machinist with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade isnot available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Machinist passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Mill wright Mechanic (Mechanical) Instructor, Theory (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Mechatronics/Instrumentation from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Mechatronics/Instrumentation from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Group Instructor/ Apprenticeship Supervisor/Senior Technical Assistant/ Junior apprenticeship and Placement Officer (Re-Advertised). | (i)AICTE recognized Bachelor degree in Civil/Mechanical / Production/ Architecture/Computer/Electrical/Electronics/Instrumentation /Automobile /Industrial Engineering/Technology or its equivalent from AICTE recognized institute/university or institutions established by Ministry of Human Resource Development (MHRD) , Government of India , on Full time regular mode basis ; (ii) Two year practical/teaching experience in the concerned trade in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution ; (iii) Hindi/Sanskrit upto Matric Standard or Higher Education |
| Electrician Instructor Theory(Re-Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electrical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electrical from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Apprenticeship Instructor Re-Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Electrical/Electronics /Production / Automobiles from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Electrical/Electronics /Production / Automobiles from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Turner Instructor Practical(Re-Advertised) | (i) National Trade Certificate/ National Apprenticeship Certificate in Turner with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Turner passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. (ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Welder (Gas & Electric) Instructor Theory (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Metallurgical /Production/Fabrication/ Welding from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Metallurgical/ Production/ Fabrication/ Welding from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Architectural Assistant Instructor Practical (ReAdvertised) | National Trade Certificate/ National Apprenticeship Certificate in Architectural Assistant with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Architectural Assistant passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Mechanic Electronic Instructor Theory(Re-Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electronics/Electronics & Communications from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electronics/Electronics & Communications from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Fitter Instructor Practical(Re-Advertised). | National Trade Certificate/ National Apprenticeship Certificate in Fitter with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Fitter passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Computer Operator Programming Assistant Instructor (Theory) (Re-Advertised). | AICTE recognized Bachelor degree in Computer Engineering/ Information Technology or its equivalent from AICTE recognized institute/university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/teaching experience; OR ‘A’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with two years practical/ teaching experience in the related field; OR B’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with one year practical/teaching experience in the related field; OR M.Sc Computer/ M.Sc Computer Application/ M.Sc Information Technology/ M.Sc Software/MCA after passing B.Sc./ BCA from a recognized university; OR Three years Diploma in Computer Application/ Engineering or its equivalent from State Board of Technical Education of any State Government with two years practical/ teaching experience; |
| Plastic Processing Operator Instructor (Practical) (ReAdvertised). | National Trade Certificate/ National Apprenticeship Certificate in Plastic Processing Operator with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/National Apprenticeship Certificate in Plastic Processing Operator passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Mechanic Electronic Instructor (Practical) (ReAdvertised). | National Trade Certificate/ National Apprenticeship Certificate in Electronics with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Desk Top Publisher Operator Instructor (Practical) (ReAdvertised). | (i) National Trade Certificate/ National Apprenticeship Certificate in Desktop publisher operator with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Desktop publisher operator passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Plastic Processing Operator Instructor Theory) (ReAdvertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Plastic Processing/ Plastic Technology / Polymer/Plastic Mould from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Plastic Processing/ Plastic Technology / Polymer/Plastic Mould from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Electrician Instructor (Practical) (Re-Advertised) | National Trade Certificate/ National Apprenticeship Certificate in Electrician with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Electrician passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Tractor Mechanic Instructor (Theory) (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Automobile/ Agriculture from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Automobile/ Agriculture from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Craft Instructor (women) Fashion Technology (Theory) (ReAdvertised). | Full time, regular mode Bachelor Degree in Apparel/Dress Design/ Garment Manufacturing/Fashion Technology from any institute/ University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/ teaching experience. OR Full time, regular mode Diploma in Apparel/Dress Design/ Garment Manufacturing/Fashion Technology from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience |
| Tractor Mechanic Instructor (Practical) (Re-Advertised) | National Trade Certificate/ National Apprenticeship Certificate in Tractor Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tractor Mechanic/ Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Wireman Instructor (Practical) (Re-Advertised). | National Trade certificate/ National Apprenticeship Certificate in Wireman with crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Wireman passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Mechanic Computer Hardware Instructor (Theory) (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Computer/Electronics from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Computer/Electronics/, Computer Hardware from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Mechanic Computer Hardware Instructor (Practical) (ReAdvertised). | National Trade Certificate/ National Apprenticeship Certificate in Mechanic Computer Hardware with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period. In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Mechanic Computer Hardware/Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Mech. Refrigerator and Air Conditioning Instructor (Practical) (Re-Advertised). | National Trade Certificate/ National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Desktop Publisher Operator (Theory) (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Printing Technology from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Printing Technology from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Draughtsman Civil Instructor (Practical) (Re-Advertised) | National Trade Certificate/ National Apprenticeship Certificate in Draughtsman Civil with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Draughtsman Civil passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Draughtsman Mechanical Instructor(Theory) (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical from State Board of Technical Education of any State Government with two years practical/ teaching experience |
| Craft Instructor (women) cutting & Sewing (Theory) (ReAdvertised) | Full time, regular mode Bachelor Degree in Apparel/ Dress Design/ Garment Manufacturing from any institute/ University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/teaching experience; OR Full time regular mode Diploma in Apparel/ Dress Design/ Garment Manufacturing from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience; |
| Draughtsman Mechanical Instructor (Practical) (ReAdvertised). | National Trade Certificate/ National Apprenticeship Certificate in Draughtsman(Mechanical) with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Draughtsman (Mechanical) passed with 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Craft Stenography Hindi Instructor (Theory) (ReAdvertised). | (i) Full time regular mode bachelor degree with minimum 60% marks in Hindi subject, from a recognized University; (ii) Diploma in Office Management and Computer Application (Hindi) or its equivalent from State Board of Technical Education of any State Government. (iii) Shorthand at a speed of 80 words per minute and 15 words per minute Transcriptions thereof and 30 word per minute in typing in Hindi; (iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent course from State Board of Technical Education of any State Government/recognized university; |
| Craft Stenography Hindi Instructor (Practical) (ReAdvertised). | (i) Full time regular mode bachelor degree with minimum 60% marks in Hindi subject, from a recognized University; (ii) National Trade Certificate/National Apprenticeship Certificate in shorthand Hindi trade passed with minimum 70% marks and CITC in Steno Hindi; (iii) Shorthand at a speed of 80 words per minute and 15 words per minute Transcriptions thereof and 30 word per minute in typing in Hindi; (iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent course from State Board of Technical Education of any State Government/recognized university; |
| Machinist Instructor (Theory) (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Production/ Industrial/Fabrication from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Production/Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Craft Stenography English Instructor (Theory) (ReAdvertised). | (i) Bachelor degree with minimum 60% marks in English subject, from a recognized University; (ii) Diploma in Office Management and Computer Application (English) or its equivalent from State Board of Technical Education of any State Government. \(iii) Shorthand at a speed of 100 words per minute and 15 words per minute transcription thereof and 40 words per minute typing in English; |
| Craft Stenography English Instructor (Practical) (ReAdvertised) | (i) Bachelor degree with minimum 60% marks in English subject, from a recognized University; (ii) National Trade Certificate/National Apprenticeship Certificate with minimum 70% marks with CITC in Steno (English); \(iii) Shorthand at a speed of 100 words per minute and 15 words per minute transcription thereof and 40 words per minute typing in English; (iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent from State Board of Technical Education of any State Government/recognized university; |
| Machinist (Grinder) Instructor (Practical) (Re-Advertised) | i) National Trade Certificate/ National Apprenticeship Certificate in Machinist (Grinder) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Machinist (Grinder) passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Craft Instructor Health Sanitary Inspector (Theory) (ReAdvertised). | Bachelor degree in Ayurvedic Medicine & Surgery (BAMS) from a recognized institution/university; OR AICTE Recognized Bachelor degree in Public Health and Environmental or Environmental Engineering/ Technology or its equivalent from AICTE recognized institute/university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis; OR Post Diploma in Health care with B.Sc. Degree; OR Diploma in Public Health and Environmental or Environmental Engineering from State Board of Technical Education of any State Government; |
| Craft Instructor Health Sanitary Inspector (Practical) (ReAdvertised) | (i) National Trade Certificate/ National Apprenticeship Certificate in Health Sanitary Inspector; (ii) Five years practical/teaching experience in concerned trade from recognized Institution/ Industrial concern covered under Apprenticeship Act, including training period; (iii) Hindi/ Sanskrit upto Matric Standard or higher education; |
| Machinist Grinder Instructor (Theory) (Re-Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Production/ Industrial/ Fabrication from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Production/ Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Litho Offset Machine Minder Instructor (Theory) (ReAdvertised)= | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Printing Technology from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Printing Technology from State Board of Technical Education of any State Governmentwith two years practical/ teaching experience. |
| Tool & Die Maker (Dies & Moulds) Instructor (Theory) (Re-Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Production/Industrial/Mechanical (Tool & Dies Maker)from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Production/Industrial/Mechanical (Tool & Dies Maker) from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Hospitality Course Senior Instructor (Hospitality) (Theory) (Re-Advertised). | Bachelor degree in Hotel Management passed with minimum 55% marks form an institute/university approved by National Council of Hotel management & Catering Technology or All India Council of Technical Education. OR Three year Diploma in Hotel Management passed with minimum 55% marks from an institute/university approved by National Council of Hotel management & Catering Technology or All India Council of Technical Education or State Board of Technical Education of any State Government; |
| Tool & Die Maker (Dies & Moulds) Instructor (Practical) (Re-Advertised) | National Trade certificate/ National Apprenticeship Certificate in Tool and Dies Maker (Dies and Moulds) with crafts instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tool and Dies Maker passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Food production Instructor (Theory) (Re-Advertised). | Bachelor degree in Hotel Management passed with minimum 50% marks form an institute/university approved by National Council of Hotel Management & Catering Technology or All India Council of Technical Education. OR Three year Diploma in Hotel Management passed with minimum 55% marks from an institute/university approved by National Council of Hotel Management & Catering Technology or All India Council of Technical Education or State Board of Technical Education of any State Government; |
| Computer Networking and Hardware Technician (ReAdvertised). | (i) 10+2 with Physics & Chemistry from a recognized Institute; (ii) Three years diploma in Computers/ Electronics Communication or its equivalent from State Board of Technical Education of any State Government with two years relevant experience in a company of repute covered under Apprenticeship Act; (iii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised). | i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Hair & Skin Care with five year practical/ teaching experience including training period; ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Computer Operator (Re-Advertised). | (i) 10+2 or its equivalent from a recognized Institution; ii) Diploma in Computer Application/ Computer Science/ Computer Engineering or its equivalent from State Board of Technical Education of any State Government. OR Post Diploma in Computer Application/ Computer Engineering or its equivalent from State Board of Technical Education of any State Government. OR ‘O level’ course from Department of Electronics and Information Technology (DOEACC), Government of India; |
| Junior Programmer (Re-Advertised). | i) Full time Regular mode Bachelor degree in Computer Applications or Regular first division Master degree in Computer Application with first division from a recognized University and two years experience in Software Development in a Government Department/ Statutory Board/ Public Sector undertaking/ Public Limited Company of repute; OR Full time Regular mode Diploma in Computer Science & Engineering / Computer Engineering/ Information Technology with first division from a Institute affiliated with State Board of Technical Education of any State Government and two years experience in software development in a Government department/Statutory Board/ Public Sector Undertaking/ Public Limited Company of repute |
| Craft Instructor (women)Fashion Technology (Practical) (Re-Advertised). | National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Fashion Technology with five year Practical/teaching experience including training period; |
| Plumber Instructor (Practical) (Re-Advertised). | (i) National Trade Certificate/ National Apprenticeship Certificate in Plumber with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Plumber passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Mill Wright Mechanic (Electrical/ Electronics) Instructor (Practical) (Re- Advertised). | National Trade Certificate/ National Apprenticeship Certificate in Electrician/Electronics/Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Electrician/ Electronics/Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Mill Wright Mechanic (Mechanical) Instructor (Practical) (Re- Advertised). | i) National Trade Certificate/ National Apprenticeship Certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Fashion Technology, Cutting and Sewing, Embroidery and Needle Work, Dress making (Re- Advertised) | Full time, Regular mode Bachelor degree in Apparel/Dress Design/Garment Manufacturing/Fashion Technology / Fashion Designing from any institute recognized by National institute of Fashion Technology / State Board of Technical Education of any State Government/All India Council of Technical Education with two years Supervisory/practical/teaching experience in the concerned trade from a reputed Industry/recognized institution; OR Full time, Regular mode Diploma in Apparel/Dress Design/Fashion Designing/Garment Manufacturing/Fashion Technology from any institute recognized by National institute of Fashion Technology / State Board of Technical Education of any State Government/All India Council of Technical Education with three year Supervisory or practical or teaching experience in the concerned trade from a reputed Industry/recognized institution; |
| Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Hair & Skin Care (Re- Advertised). | Full time, regular mode Bachelor Degree in Beauty Culture/Beauty Culture and Hair Dressing from any recognized institute/university recognized by National Institute of Fashion Technology/ All India Council of Technical Education/State Board of Technical Education of any State Government with two years supervisory or practical or teaching experience in the concerned trade from a reputed Industry/recognized institution; OR Full time, regular mode Diploma in Beauty Culture/ Beauty Culture and Hair Dressing from any institute/university recognized by National Institute of Fashion Technology/ All India Council of Technical Education/State Board of Technical Education of any State Government with three years supervisory or practical or teaching experience in the concerned trade from a reputed Industry/recognized institution; |
| Lab Attendant (Food Production, Food & Beverage Service) Instructor (Theory) (Re- Advertised). | (i) One year and six month duration certificate Course or Diploma in concerned trade from Food Craft Institute/Institute of Hotel Management approved by National Council of Hotel Management & Catering Technology / All India Council of Technical Education / State Board of Technical Education of any State Government; (ii) Five years Practical experience from a recognized institution/minimum three star Hotel, Including training period; |
| Painter General Instructor(Theory) (Re- Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Paint Technology/ Master’s Degree in Painting from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Paint Technology / Surface Technology from State Board of Technical Education of any State Government with two years practical/ teaching experience |
| Mechanic Motor Vehicle Instructor(Theory) (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical / Automobile from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Automobile from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Information Technology and Electronics System Maintenance Instructor(Theory) (Re- Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Electronics/ Electronics & Communications/ TeleCommunication Engineering from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Electronics/ Electronics & Communications/ Tele-Communication Engineering from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Mechanic Machine Tool maintenance Instructor(Theory) (Re- Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical / Production /Industrial from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical / Production /Industrial from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Mechanic Motor Vehicle Instructor(Practical) (ReAdvertised). | National Trade Certificate/ National Apprenticeship Certificate in Mechanic Motor Vehicle with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Information Technology and Electronics System Maintenance Instructor (Practical) (Re- Advertised | i) National Trade Certificate/ National Apprenticeship Certificate in Information Technology and Electronics System Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Information Technology and Electronics System Maintenance / Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Mechanic Machine Tool Maintenance Instructor (Practical) (Re- Advertised). | National Trade Certificate/ National Apprenticeship Certificate in Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Sheet Metal Worker Instructor (Theory) (Re- Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/ Metallurgical/ Production/ Industrial/ Fabrication from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/ Metallurgical/ Production/ Industrial/ Fabrication from State Board of Technical Education of any State Government with two years practical/ teaching experience |
| Instrument Mechanic Instructor (Theory) (Re- Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Instrumentation /Instrumentation & Control/Electronics & Instrumentation from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Instrumentation/Instrumentation & Control/Electronics & Instrumentation from State Board of Technical Education of any State Government with two years practical/ teaching experience |
| Craft Instructor (women)(Dress Making (Theory) (ReAdvertised). | Full time, regular mode Bachelor Degree in Apparel/ Dress Design/ Garment Manufacturing from any institute / University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/teaching experience; OR Full time regular mode Diploma in Apparel/ Dress Design/ Garment Manufacturing from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience; |
| Mechanic Diesel Instructor(Theory) (Re- Advertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Automobile from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Automobile from State Board of Technical Education of any State Governmentwith two years practical/ teaching experience. |
| Instrument Mechanic Instructor (Practical) (ReAdvertised). | i) National Trade Certificate/ National Apprenticeship Certificate in Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Craft Instructor (women)(Dress Making) (Practical) (Re- Advertised) | i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Dress Making/ Two years Fashion Technology with five year practical/ teaching experience including training period; |
| Mechanic Diesel Instructor (Practical) (Re- Advertised) | i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Diesel with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Diesel/ Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Mechanic Agriculture Machinery Instructor (Theory) (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Mechanical/Agriculture from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Mechanical/Agriculture Engineering / Agriculture Technology from State Board of Technical Education of any State Government with two years practical/ teaching experience |
| Mechanic Consumer Electronics Instructor (Practical) (Re- Advertised). | National Trade Certificate/ National Apprenticeship Certificate in Mechanic Consumer Electronics with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Consumer Electronics/Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Mechanic Agriculture Machinery Instructor (Practical) (ReAdvertised) | National Trade Certificate/ National Apprenticeship Certificate in Mechanic Agriculture Machinery with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tractor Mechanic / Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period. |
| Craft Instructor (women) Hair & Skin Care(Theory) (ReAdvertised) | i) Full time, regular mode Bachelor Degree in Beauty Culture/ Beauty Culture & Hair Dressing from any institute/University recognized by National Institute of Fashion Technology (NIFT)/ All India Council of Technical Education/ State Board of Technical Education of any State Government with one year practical/teaching experience; OR Full time, regular mode Diploma in Beauty Culture / Beauty Culture & Hair Dressing from State Board of Technical Education of any State Government or National Institute of Fashion Technology with two year practical/ teaching experience; |
| Interior Decoration and Designing Instructor (Theory) (ReAdvertised). | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture / Civil / Interior Decoration & Designing from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture / Civil / Interior Decoration & Designing from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Interior Decoration and Designing Instructor (Practical) (Re- Advertised) | i) National Trade Certificate/ National Apprenticeship Certificate in Interior Decoration and Designing with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period; In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Interior Decoration and Designing passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period |
| Craft Instructor (women) Computer Aided Embroidery (Theory) (Re- Advertised) | Full time, regular mode Bachelor Degree in Apparel/Dress Design/ Garment Manufacturing/ Fashion technology from any recognized institute/ University recognized by National Institute of Fashion Technology(NIFT)/ All India Council of Technical Education with one year practical/ teaching experience. OR Full time, regular mode Diploma in Apparel/Dress Design/ Garment Manufacturing/Fashion Technology from Board of Technical Education of any State Government or National Institute of Fashion Technology with two year Practical/ teaching experience |
| Craft Instructor (women) Computer Aided Embroidery (Practical) (Re- Advertised) | i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training course (TTC) in Computer Aided Embroidery/ Embroidery with five year Practical/teaching experience including training period: ii) Hindi/ Sanskrit upto Matric Standard or higher education. |
| Draughtsman Civil Instructor (Theory) (Re- Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/ Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience |
| Carpenter Instructor (Theory) (Re- Advertised) | AICTE recognized Bachelor degree in Engineering / Technology or its equivalent in Architecture/Civil from AICTE recognized institution/ university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical/ teaching experience. OR Diploma in Engineering or its equivalent in Architecture/Civil from State Board of Technical Education of any State Government with two years practical/ teaching experience. |
| Technical Assistant(Re- Advertised). | AICTE recognized Bachelor Degree in Mechanical /Electrical /Civil / Electronics /Information Technology /Architecture/Computer from AICTE recognized institutions /university or Institutions established by Ministry of Human Resource Development (MHRD), Government of India, on full time regular mode basis, with one year practical / teaching experience; Or Diploma in Mechanical/ Electrical /Civil/Electronics/Information Technology/Architecture/Computer from Haryana State Board of Technical Education, with two years practical / teaching experience; |
Age Limit
Candidates’ age must be 17-42 years. For the Details of age relaxation, Check Official Notification
HSSC Instructor, Welder, Storekeeper & Other Jobs Salary Details
Name of the Post | Pay Scale |
| Skill Development & Industrial Training Department, Haryana, Panchkula | |
| Surveyor Instructor (Theory) | FPL-6(Rs. 35400-112400) |
| Forger & Heat Treater (Black Smith)Instructor (Theory) | FPL-6(Rs. 35400-112400) |
| Librarian (Re-Advertised) | Pay Matrix Level-6 (Rs. 35400-112400)(Pre revised Rs. 9300-34800+3600 G.P.) |
| Turner Instructor, Theory(Re-Advertised) | Pay Matrix Level-6/Rs. 35400(Pre revised 9300-34800+3600G.P |
| Welder (Gas & Electric) Instructor, Practical (ReAdvertised). | FPL-6(Rs. 35400-112400) Pre-Revised 9300- 34800+3600 GP |
| Fitter Instructor, Theory (Re-Advertised) | FPL-6 (Rs. 35400-112400) Pre-Revised 9300- 34800+3600 GP. |
| Employability Skill Instructor, (Re-Advertised). | FPL-6 (Rs. 35400-112400). |
| Surveyor Instructor, Practical (Re-Advertised). | FPL-6 (Rs. 35400-112400) |
| Computer Instructor (Re-Advertised | FPL-6 (Rs. 35400-112400) |
| Mechanical Refrigerator and Air Condition Instructor, Theory (Re-Advertised) | FPL-6 (Rs. 35400-112400) |
| Workshop Calculation & Science Instructor (ReAdvertised) | FPL-6 (Rs. 35400-112400) |
| Engineering Drawing Instructor (Re-Advertised). | FPL-6 (Rs. 35400-112400) |
| Plumber Instructor, Theory (Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Foundry Man (Moulder) Instructor (Theory) (Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Architectural Assistant Instructor, Theory (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Carpenter Instructor, Practical (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Wireman Instructor, Theory (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Storekeeper (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Mill wright Mechanic (Electrical/Electronic) Instructor, Theory (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Machinist Instructor, Practical (Re-Advertised | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Mill wright Mechanic (Mechanical) Instructor, Theory (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Group Instructor/ Apprenticeship Supervisor/Senior Technical Assistant/ Junior apprenticeship and Placement Officer (Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+4000 GP. |
| Electrician Instructor Theory(Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Apprenticeship Instructor Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Turner Instructor Practical(Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Welder (Gas & Electric) Instructor Theory (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Architectural Assistant Instructor Practical (ReAdvertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Mechanic Electronic Instructor Theory(Re-Advertised). | – FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Fitter Instructor Practical(Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Computer Operator Programming Assistant Instructor (Theory) (Re-Advertised). | – FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Plastic Processing Operator Instructor (Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Mechanic Electronic Instructor (Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Desk Top Publisher Operator Instructor (Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Plastic Processing Operator Instructor Theory) (ReAdvertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Electrician Instructor (Practical) (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Tractor Mechanic Instructor (Theory) (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Craft Instructor (women) Fashion Technology (Theory) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Tractor Mechanic Instructor (Practical) (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Wireman Instructor (Practical) (Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Mechanic Computer Hardware Instructor (Theory) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Mechanic Computer Hardware Instructor (Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Mech. Refrigerator and Air Conditioning Instructor (Practical) (Re-Advertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Desktop Publisher Operator (Theory) (Re-Advertised) | FPL-6 (35400-112400). |
| Draughtsman Civil Instructor (Practical) (Re-Advertised) | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Draughtsman Mechanical Instructor(Theory) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP. |
| Craft Instructor (women) cutting & Sewing (Theory) (ReAdvertised) | FPL-6 (35400-112400). |
| Draughtsman Mechanical Instructor (Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-revised 9300-34800+3600 GP |
| Craft Stenography Hindi Instructor (Theory) (ReAdvertised). | FPL-6 (35400-112400) |
| Craft Stenography Hindi Instructor (Practical) (ReAdvertised). | – FPL-6 (35400-112400). |
| Machinist Instructor (Theory) (Re-Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP. |
| Craft Stenography English Instructor (Theory) (ReAdvertised). | FPL-6 (35400-112400). |
| Craft Stenography English Instructor (Practical) (ReAdvertised) | FPL-6 (35400-112400). |
| Machinist (Grinder) Instructor (Practical) (Re-Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Craft Instructor Health Sanitary Inspector (Theory) (ReAdvertised). | FPL-6 (35400-112400). |
| Craft Instructor Health Sanitary Inspector (Practical) (ReAdvertised) | FPL-6 (35400-112400). |
| Machinist Grinder Instructor (Theory) (Re-Advertised). | -FPL-6 (35400-112400 |
| Litho Offset Machine Minder Instructor (Theory) (ReAdvertised)= | FPL-6 (35400-112400). |
| Tool & Die Maker (Dies & Moulds) Instructor (Theory) (Re-Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Hospitality Course Senior Instructor (Hospitality) (Theory) (Re-Advertised). | FPL-6 (35400-112400) |
| Tool & Die Maker (Dies & Moulds) Instructor (Practical) (Re-Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Food production Instructor (Theory) (Re-Advertised). | FPL-6 (35400-112400). |
| Computer Networking and Hardware Technician (ReAdvertised). | FPL-6 (35400-112400) |
| Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised). | FPL-6 (35400-112400)Pre-Revised 9300-34800+3600 GP. |
| Computer Operator (Re-Advertised). | FPL-6 (35400-112400). |
| Junior Programmer (Re-Advertised). | FPL-6 (35400-112400). |
| Craft Instructor (women)Fashion Technology (Practical) (Re-Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP.. |
| Plumber Instructor (Practical) (Re-Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Mill Wright Mechanic (Electrical/ Electronics) Instructor (Practical) (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Mill Wright Mechanic (Mechanical) Instructor (Practical) (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Fashion Technology, Cutting and Sewing, Embroidery and Needle Work, Dress making (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+4000 GP. |
| Group Instructor In-Charge (Women) / Group Instructor (Women) for TTC in Hair & Skin Care (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+4000 GP. |
| Lab Attendant (Food Production, Food & Beverage Service) Instructor (Theory) (Re- Advertised). | FPL-2 (19900-63200). |
| Painter General Instructor(Theory) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 G |
| Mechanic Motor Vehicle Instructor(Theory) (ReAdvertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Information Technology and Electronics System Maintenance Instructor(Theory) (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP. |
| Mechanic Machine Tool maintenance Instructor(Theory) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Mechanic Motor Vehicle Instructor(Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Information Technology and Electronics System Maintenance Instructor (Practical) (Re- Advertised | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP. |
| Mechanic Machine Tool Maintenance Instructor (Practical) (Re- Advertised). | -FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Sheet Metal Worker Instructor (Theory) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP. |
| Instrument Mechanic Instructor (Theory) (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Craft Instructor (women)(Dress Making (Theory) (ReAdvertised). | FPL-6 (35400-112400). |
| Mechanic Diesel Instructor(Theory) (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600 GP |
| Instrument Mechanic Instructor (Practical) (ReAdvertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Craft Instructor (women)(Dress Making) (Practical) (Re- Advertised) | FPL-6 (35400-112400). |
| Mechanic Diesel Instructor (Practical) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Mechanic Agriculture Machinery Instructor (Theory) (ReAdvertised). | -FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Mechanic Consumer Electronics Instructor (Practical) (Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP |
| Mechanic Agriculture Machinery Instructor (Practical) (ReAdvertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP |
| Craft Instructor (women) Hair & Skin Care(Theory) (ReAdvertised) | FPL-6 (35400-112400) |
| Interior Decoration and Designing Instructor (Theory) (ReAdvertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Interior Decoration and Designing Instructor (Practical) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Craft Instructor (women) Computer Aided Embroidery (Theory) (Re- Advertised) | FPL-6 (35400-112400) |
| Craft Instructor (women) Computer Aided Embroidery (Practical) (Re- Advertised) | FPL-6 (35400-112400). |
| Draughtsman Civil Instructor (Theory) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Carpenter Instructor (Theory) (Re- Advertised) | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP. |
| Technical Assistant(Re- Advertised). | FPL-6 (35400-112400) Pre-Revised 9300-34800+3600GP |
Selection Process
Selection will be done as per Written test/ interview/ merit list
Application Fee
Category of post | General | SC/BC/EWS Candidates of Haryana State | ||
Cat. No. 1 to 71 & 73 to 97 | Rs. 150 | Rs. 75 | Rs. 35 | Rs. 18 |
| Cat. No. 72 | Rs. 100 | Rs. 50 | Rs. 25 | Rs. 13 |
PwD (Person with Disability)/ExServiceman of Haryana | No. Fee | |||
Other Haryana Jobs
- Posts not found
How to Apply for Instructor, Welder, Storekeeper & Other Jobs
- Go to HSSC official website – hssc.gov.in
- Find the correct notification and open it.
- Read the notification correctly to check your eligibility for HSSC jobs 2019:
- Eligible candidates fill all mandatory details of online registration form and upload necessary documents.
- Finally, submit your application through online mode till the last date.
Important Dates for HSSC Instructor, Welder, Storekeeper & Other Application
- Date of notification- July 20, 2019
- Opening date of online application- August 5, 2019
- Closing date of online application- 14-09-2019
- Closing date of deposit of application fee- 18-09-2019
Important Links
| HSSC Official Notification | Click Here |
| Online Application Link | Click Here to Apply Online |
